Pulsar 510 DL 2.0 PRO Auto-Draw Vape Bar - Thermo Crystal Ball

Top Quality Portable Auto-Draw Vape

• Discreet elfbar disposable-shaped 510 battery
• 1000 mAh
• 5 voltage settings, 2.4 V - 3.8 V
• Auto-draw function- inhale to activate
• LED screen & puff counter
• Color-Changing Thermo series

Enjoy your own 510 carts in an elfbar-style rechargeable vape. The Pulsar 510 DL 2.0 PRO Auto-Draw Vape Bar is an awesome companion for any vaper.

A part of the 510 DL series, this palm-sized vape bar will keep your toking on the down low while you take puffs on the go. With a 1000 mAh battery capacity, 5 voltage settings, and auto-draw function, it's hard to beat the convenience of this 510 battery.

The Pulsar 2.0 Pro Vape Bar is so easy to use. The bottom is magnetic and can be pulled right off to reveal the 510 thread for your cartridge. Just screw in your cart, attach the base to the body, and inhale to use. That's it!

There's a small button at the bottom, for changing the voltage or activating pre-heat, but you don't even have to use it: quickly inhale a few times to perform all the functions the button could do.

Check out the super cool color-changing Thermo series from Pulsar! The Pulsar 510 DL 2.0 PRO Auto-Draw Vape Bar is available in Thermo Crystal Ball, changing from magenta purple to light blue with the heat of your touch.

So don't delay, act now! Supplies are running out! Our customers LOVE every product in the Pulsar Thermo Series line, and the Pulsar 510 DL 2.0 PRO Auto-Draw Vape Bar - Thermo Crystal Ball is no exception. Grab yours today, or give your friend the best gift they could ever ask for: a discreet and rechargeable vape bar!

Pulsar 510 DL Vape Button Functions

Power On/Off:
The device doesn't turn off. It enters a standby mode after 10 seconds. To wake the device up, press the button on the bottom 1 time and the screen will turn on and the LED will flash the current voltage color.  You can also pull from the mouthpiece and the device will be ready to vape. The screen displays the battery life in %.

Pre-heating:
Quickly pull from mouthpiece twice to activate the pre-heat function. You can also press the button on the bottom 2 times to activate pre-heating.

Adjust Voltage:
You can change the voltage setting by pressing the button on the bottom 1 time. The screen also indicates the voltage setting in bars. The LED will illuminate with the corresponding color

• 2.4 V - Yellow
• 2.6 V - Purple
• 2.8 V - Green
• 3.4 V - Blue
• 3.8 V - Red

The voltage and battery percentage levels are always on the display screen while the voltage is being adjusted. The current voltage will flash 3 times and then stay on for 10 seconds.

What's in the Pulsar 510 DL 2.0 Pro Vape Bar Box?

• 1 Pulsar 510 DL 2.0 PRO battery
• 1 Bottom magnetic connector

Pulsar 510 DL Pipe Auto-Draw Vape Tech Specs:

• 1000 mAh battery capacity
• Five voltage settings (2.4 - 3.8 V)
• 15 second pre-heating function (1.8 V)
• Auto-draw cartridge vaporizer
• Tactile button feature
• Compact and discreet bar-style body
• Silicone mouthpiece
• Universal 510 threading
• Digital display
• Haptic feedback
• USB-C charging (charger sold separately)
• Auto standby mode after 10 seconds of use
• Short-circuit protection
• Multiple colors and finishes available
• 6 month warranty

How to use the Pulsar 510 DL 2.0 Pro

Quick Start Instructions

1. Connect your device to a power source and charge until the light turns green.
2. Insert the 510-threaded cartridge of your choice.
3. Press the button on the bottom of the device 1 time to wake it up, or pull from the mouthpiece.
4. Press the button on the bottom 1 time to change the voltage. Repeat until you are at your desired setting.
5. Quickly pull twice to start pre-heating, or press power button 2 times.
6. Pull from mouthpiece and enjoy.

Instructions:

1. Make sure that the bottom magnetic connector is properly connected to the bottom of the unit. The battery will not charge if the bottom connector is not attached.
2. Plug in and connect to a power source. You will see the light flash once when the battery is connected.
3. Allow the battery to fully charge before first use. The light will turn green. Disconnect the device from the power source before use.
4. Remove the bottom magnetic connector and firmly screw in the 510-threaded cartridge of your choice.
5. Insert the cartridge into the device and ensure that the bottom magnetic connector is properly reconnected. You will feel haptic feedback to let you know there is a good connection.
6. Press power button 1 time to adjust the voltage.
7. Activate the pre-heat function to prime the cartridge by giving the unit 2 quick pulls or press the power button 2 times. This will activate the unit at 1.8 V for 15 seconds. After 14 seconds, the unit will switch to your previously selected voltage.
8. Simply pull from the mouthpiece to activate the cartridge vapor and enjoy your session!
9. To reset puff counter, press the button 3 times quickly; on the third press, hold the button down until the puff counter resets.

How to Clean the 2.0 Pro Vape Bar

1. Remove the bottom magnetic connector from the battery.
2. Wipe the outside and inside of the bottom magnetic connector with an isopropyl alcohol pad. Use an alcohol swab to wipe any excess oil out of the 510 screw-in connector.
3. Clean the inside air pathway with an alcohol swab. Using a circular motion, work your way up and down the air pathway until you do not see any more oil.
4. Do not submerge any part of the device in cleaning solution. Allow all parts to air dry prior to resuming use.

NOTE: The mouthpiece is NOT removable. Attempting to remove it could impair or permanently disable the breah control functionality.

Shop All Pulsar