Pulsar 510 DL Pipe Shaped Vape - Thermo Royal Wizard

Pipe Shaped Vaporizer

• Discreet pipe shaped vape battery
• 650 mAh
• Adjustable voltage, 2.8 V - 4.0 V
• Auto-draw function- inhale to activate
• Color-changing Thermo series

Take a step up from our best-selling Pipe Shaped Vape and try the new Pulsar 510 DL Pipe Shaped Vape.

510 DL Pipes are so easy to use. 510 threading is compatible with most carts on the market, and this pipe shaped vape features auto-draw, where simply inhaling will activate the device.

A large button at the bowl of the pipe shaped vape battery lets you adjust the voltage, check the battery level, and activate a pre-heat mode. All of these settings will be displayed on its integrated LED display and colorful illuminated ring.

Check out the super cool heat-reactive Thermochromic series from Pulsar! The Pulsar 510 DL Pipe Shaped Vape is now available in Thermo Royal Wizard, changing colors from deep purple to light pink with your touch.

This is the best pipe shaped vape for sale. If you want a clasically-shaped pipe for your vapes, you'll want a Pulsar 510 DL Pipe Shaped Vape. Grab one today!

Pulsar 510 DL Pipe Button Functions

Power On/Off:
To turn the device on or off, press the button 5 times. The indicator light will remain on for one second to indicate the
power-on or power-off state. The device does not have auto-shutoff and must be turned off manually.

Pre-heating:
Press the button 2 times within 15 seconds or inhale 2 times quickly to pre-heat the device. Colorful rainbow lights and a fire icon will flash to indicate that it is pre-heating. The process will be interrupted if you do anything else with the device while it’s pre-heating.

Screen Display:
The screen displays the current voltage level, the battery level, and a lightning icon during charging. The screen turns off after 10 seconds of inactivity.

Adjust Voltage:
Press the button 3 times within 1.5 seconds or inhale 3 times quickly to adjust the voltage. The corresponding light color for each voltage will flash 3 times when selected, as well as a letter appearing on the display.

• 2.8V - Green (L)
• 3.4V - Blue (M)
• 4.0V - Red (H)

The voltage and battery percentage levels are always on the display screen while the voltage is being adjusted. The current voltage will flash 3 times and then stay on for 10 seconds.

Battery Level Indicator:
Short press the button to display the current battery level when in normal working mode.

• When over 75%, the green light will turn on for 2 seconds.
• When between 35-75%, the blue light will turn on for 2 seconds.
• When below 35%, the red light will turn on for 2 seconds.

When voltage drops below 3.2V, the red light will flash 10 times, indicating that the device has entered the standby state. On the screen display, the voltage level will be shown as 0. The device does not support pass-through use or fast charging

What's in the Pulsar 510 DL Pipe box?

• Pulsar 510 DL Pipe Battery
• Matching bent stem mouthpiece
• USB-C charging cable

Pulsar 510 DL Pipe Auto-Draw Vape Tech Specs:

• Dimensions: 1.5 x 3 x 5.5 inches (3.81 x 7.62 x 13.97cm)
• Maximum Cartridge Size: 61mm length x 11.5mm diameter
• Battery Capacity: 650 mAh
• Voltage: 2.8V / 3.4V / 3.8V (1.8V Pre-heat)
• Charging: USB-C
• Resistance: 0.8-2.0 Ω
• Auto-draw functionality and manual button control
• Digital display and LED light indicator strip
• Wood grain patterned housing
• Multiple colors available

How to use the Pulsar 510 DL Pipe Battery

1. Charge the battery using the provided USB-C cable. Plug into the connector on the bottom of the unit and attach the cable to a power source. The red light will turn on when it is connected and charging.
2. Allow the battery to fully charge before use. The light will turn green when the device is fully charged. Disconnect the device from the cable when it is fully charged.
3. Remove the pipe stem (twist off) and screw in a 510 threaded cartridge of your choice into the bowl of the pipe.
4. Reattach the pipe stem (twist on and lock) and ensure it is firmly connected before
   use. Use without the stem for larger cartridges.
5. If the unit is turned off, press the button five times to turn it on.
6. Adjust the voltage by pressing the button 3 times or inhaling on the mouthpiece 3 times. (Green Light = 2.8V, Blue Light = 3.4V, Red Light = 4.0V)
7. Pre-heat the device by pressing the button 2 times or inhaling on the mouthpiece 2 times. Colorful rainbow lights will flash to indicate that it is pre-heating.
8. Press and hold the button or inhale slowly to vape. The current voltage light will brighten and remain on while vaping. The light will gradually fade out when you stop. While vaping, the screen displays the voltage setting and static current light.

Shop All Pulsar