Lookah Python Dab Vape, Assorted Colors

• 650 mAh dab vape. 
• Flip-top quickly reveals quartz coil. 
• 3 voltage settings + auto preheat function. 
• Available in assorted colors.

Enjoy your dabs in sophistication and style with the compact and discreet Python Wax Vape from Lookah.

This full metal vape is about the size of a zippo lighter and just as light. The body is covered with an elegant serpentine textured shell.

Flip open the top to reveal a 710 Quartz Coil Type D, a deep ceramic dish to offer the best blend of taste and cloud size from your concentrates. When you're ready to enjoy, just turn the mouthpiece out and tap the side button a couple of times to enjoy delicious, perfectly vaporized dabs.

With the built-in dab tool, you have everything on hand for loading the quartz coil. Scoop out a small peppercorn-sized dab of your favorite extracts and load it onto the center of the atomizer plate.

This vape uses the same 710 atomizers as other Lookah devices. When you're ready to augment your experience, try one of Lookah's other atomizer types.

• Type A: 360 airflow, max taste.
• Type B: Large dual holes, big clouds. 
• Type C: Square coil, best for saving wax.
• Type D: (included with the Python) See-through, good balance between taste and clouds.

Available in Assorted Colors

The Lookah Python is available in an assortment of colors. Each order will receive a random color. Use the Request Color option above to request a color. We cannot guarantee your color will be in stock.

How to Use the Python Vape

1. Before turning on the vape, place a small glob of wax into the center of the atomizer coil. Do not overload the vape, as this can lead to a burnt taste and excess wax and can clog the vape
2. Five (5) clicks of the power button turn the vape on/off.
   When you turn the vape on, the display screen will flash three times and then start a countdown from 9 to 0. This indicates the atomizer is preheating.
3. Two (2) clicks of the power button will change the voltage setting. There are three voltage settings. Mode 1, Mode 2, Mode 3. These are shown by the numbers 1,2, or 3 on the display.
   Voltage settings
   Mode 1: 3.4V
   Mode 2: 3.7V
   Mode 3: 4.0V
4. Swivel the mouthpiece to the open positions. Facing towards the power button.
5. Press and hold the power button and, at the same time, inhale from the mouthpiece to vape for up to 10 seconds at a time. After 10 seconds, the display will flash 3 times, and the vape will return to standby.
6. Turn off the vape when not in use and return the mouthpiece to the closed position.
7. If there is no operation for 60 minutes, the vape will automatically turn off.

How to Clean the Python Vape

1. After you have finished using the vape, you can wipe around the inside of the coil with a q-tip to clean away any excess wax.
2. Remove the atomizer coil and, with a small brush or pipe cleaner and some isopropyl alcohol, clean around the threaded area of the vape and the airway passage in the vape.
3. Clean the threaded end of the atomizer coil to remove any wax residue.
4. Clean the mouthpiece with a small brush or pipe cleaner.
5. Wipe around the inside of the lid with a q-tip
6. You can use a damp cloth to wipe around the outside of the vape.

How to Charge the Python Vape

1. Connect one end of a USB Type C cable to the vape and the other end to a USB charging port
2. The screen will flash while the device is charging
3. When fully charged, all seven (7) battery segments will show around the display, and the number 8 will show.

Python Vape Kit Comes With

• 1 Lookah Python Vape
• 2 710 Quartz Coils (1 Pre-Installed)
• 1 Dab Tool
• 1 User Manual

Specifications/Features

• Battery: 650 mAh
• Auto Preheat
• USB Type-C
• Replaceable 710 Coil

Shop All Lookah Glass