Pre-rolled cones have become the new gold standard. I’m sure you have smoked your fair share of them. People usually buy them from the dispensary, when they are so lucky to live in a free state. But what if you don’t want to pay so much per joint or perhaps you don’t have access to a dispensary? Well, look no further cuz we’re gonna look at how to make your own pre-rolled cone joint.
This may be a simple concept to many of you, but not to me. I love burning a big cone, but I really don’t like the quality of the stuff used in most dispensary bought pre-rolled cones. Let’s face it, most of them use sun leaves and small lower quality nugs.
I always want to use the the best kolas of stuff I know is grown, cured, and manicured well. So, I need to grab a grinder and break it down myself and make my own pre-rolled cone joints. Let’s talk about the best ways to go from one of those delicate pre-rolled cone papers to a beautiful joint.
There are a few different typical designs, so we will look at a few. The most comprehensive collection of cone loaders and fillers are from the cone masters over at RAW, so let’s check out their best devices for making perfect cones.
First, there is the Raw Cone Filler. This is a little bit more expensive than the other style, but you can feel the difference in the speed and convenience. This was RAW's first iteration at a device to more easily create perfect cone joints.
Rolling your own with a Raw Cone Filler is simple and quick. To roll your own cone with a Raw Cone Filler, just follow these steps: 1) Just fill it up, 2) attach a cone, 3) slide the lid back and forth, and like magic it's done and you have a perfect cone joint! I couldn’t believe it was done so fast.
The other design is more simple and is called a RAW Cone Loader. It comes it two different sizes, 1 1/4 and king size cones. This consists of a piece of plastic that acts almost like a funnel and a wood poker. It was modeled after a dustpan & broom. This kit includes, a cone loader, a scraping card, and a wood poker.
The RAW Cone Loader is even more simple than the filler. To quickly make your own cone with a RAW Cone Loader, just follow these steps: 1) Use the card to fill the cone loader and 2) put it into the cone. 3) Then use the included natural wood poker to pack the herb down.
The final design we will look at is the RAW Six Shooter Multi-Cone Loader. This device is perfect if you have a dispensary, business, or are just throwing an awesome huge party. If you are throwing a party this great, please let me know because this is definitely my kind of party. You can roll six amazing huge joints all at once in about forty-five seconds.
The design of the Six Shooter was inspired by an old Spanish millstone. To roll up to six perfect joints at once with a RAW Six Shooter Multi-Cone Loader, follow these steps: 1) remove the center pin, 2) move the plate to decide how many cones to fill at once or simply remove the plate entirely to fill all six, 3) fill the holes with the proper size RAW cones like RAW King Size, 4) add your favorite herb to the top, 5) replace the lid and smack it on a hard surface. 6) Finally, you can finish them off by using the poker.
This blog should help you to make or roll your own pre-rolled cone joints from pre-rolled papers. While other styles of loaders do exist, this blog sticks to the most common cone loader and filler designs so that we can help the most people. At Waterbeds 'n' Stuff, we have a great selection of cone loaders and fillers as well as all the best rolling papers and wraps. If you have any questions, you can reach out to us on our website, Instagram or at one of our 12 retail stores.
*These statements have not been evaluated by the United States Food and Drug Administration.
**The beliefs and opinions expressed in this blog are not those of Waterbeds ‘n’ Stuff.